Table of Contents
Advertisement
6
Advanced Configuration
System Identification
The system information parameters for the wireless bridge can be left at their default
settings. However, modifying these parameters can help you to more easily
distinguish different devices in your network.
The wireless bridge allows the selection of the band to be used for bridge links. The
bridge band can support no wireless clients. Alternatively, bridging can be disabled
and both bands can support access point functions.
System Name – An alias for the wireless bridge, enabling the device to be uniquely
identified on the network. (Default: Dual Band Outdoor AP; Range: 1-22 characters)
Outdoor Bridge Band – Selects the radio band used for bridge links.
• A – Bridging is supported on the 802.11a 5 GHz band.
• G – Bridging is supported on the 802.11b/g 2.4 GHz band.
• None – Bridging is not supported on either radio band. Allows both bands to
support access point operations for wireless clients.
Location – A text string that describes the system location. (Maximum length: 20
characters)
Contact – A text string that describes the system contact. (Maximum length: 255
characters)
6-3
Advertisement
Table of Contents
