Pppoe Service-Name; Pppoe Restart - Hirschmann BAT54 Installation Manual

7
Command Line Interface
Command Usage
You must enter a password with this command, and a user name with the
pppoe username command.
Example
DUAL OUTDOOR#(if-ethernet)#pppoe password 12345
DUAL OUTDOOR#
Related Commands
pppoe username (7-61)

pppoe service-name

This command sets the service name for the PPPoE tunnel.
Syntax
pppoe service-name <string>
string - Service name assigned by the service provider.
(Range: 1-63 alphanumeric characters)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
The service name is normally optional, but may be required by some service
providers.
Example
DUAL OUTDOOR#(if-ethernet)#pppoe service-name classA
DUAL OUTDOOR#

pppoe restart

This command restarts the PPPoE connection with updated parameters.
Command Mode
Interface Configuration (Ethernet)
Command Usage
This command restarts PPPoE service using the most recently configured
parameters.
Example
DUAL OUTDOOR#(if-ethernet)#pppoe restart
DUAL OUTDOOR#
7-62