7
Command Line Interface
wds enable
This command enables WDS forwarding for a wireless port ID. Use the no form to
disable WDS forwarding for a wireless port ID.
Syntax
[no] wds enable <port-id>
• port-id - The wireless port number for the link. (1 for Slave units; 1-16 for
Master units)
Default
WDS forwarding disabled on all ports
Command Mode
Global Configuration
Example
DUAL OUTDOOR(config)#wds enable 1
DUAL OUTDOOR(config)#
show wds
This command displays the current entries in the WDS forwarding table.
Syntax
show wds
Command Mode
Exec
7-44