Table of Contents
Advertisement
To enter Interface mode, you must enter the "interface ethernet" or "interface
wireless a" command while in Global Configuration mode. The system prompt will
change to "DUAL OUTDOOR(if-ethernet)#," or "DUAL OUTDOOR(if-wireless a)"
indicating that you have access privileges to the associated commands. You can
use the end command to return to the Exec mode.
DUAL OUTDOOR(config)#interface ethernet
DUAL OUTDOOR(if-ethernet)#
Command Line Processing
Commands are not case sensitive. You can abbreviate commands and parameters
as long as they contain enough letters to differentiate them from any other currently
available commands or parameters. You can use the Tab key to complete partial
commands, or enter a partial command followed by the "?" character to display a list
of possible matches. You can also use the following editing keystrokes for
command-line processing:
Keystroke
Ctrl-A
Ctrl-B
Ctrl-C
Ctrl-E
Ctrl-F
Ctrl-K
Ctrl-L
Ctrl-N
Ctrl-P
Ctrl-R
Ctrl-U
Ctrl-W
Esc-B
Esc-D
Esc-F
Delete key or
backspace key
Function
Shifts cursor to start of command line.
Shifts cursor to the left one character.
Terminates a task and displays the command prompt.
Shifts cursor to end of command line.
Shifts cursor to the right one character.
Deletes from cursor to the end of the command line.
Repeats current command line on a new line.
Enters the next command line in the history buffer.
Shows the last command.
Repeats current command line on a new line.
Deletes the entire line.
Deletes the last word typed.
Moves the cursor backward one word.
Deletes from the cursor to the end of the word.
Moves the cursor forward one word.
Erases a mistake when entering a command.
Entering Commands
7
7-5
Advertisement
Table of Contents
