Table of Contents
Advertisement
2.5.2
Defining IP parameters
The IP parameters must be entered when the device is installed for the first
time. The device offers the following options for assigning the IP parameters:
via DHCP (Option 82)
via BOOTP
via the HiDiscovery or Industrial HiVision application
via the V.24 interface
via the AutoConfiguration Adapter
2.5.3
Defining WLAN basic settings
You have the following options to define the WLAN basic settings:
via the wired local network (LAN)
via the wireless network (WLAN), if the WLAN encryption (e.g. WPA2) is
set accordingly in a device with a wireless interface and in the
configuration computer.
via the V.24 interface
2.5.4
Configuring the transmit power
You have the option to set the transmit power using LANconfig or (error in
org) Webconfig.
Use LANconfig or Webconfig to start the configuration of the device.
In the menu tree, open the Configuration > Wireless LAN > General
dialog.
In the "General" tab, specify in the "General" frame the country in which
you are installing the device.
If you are using an E-certified device in a vehicle and are driving the
vehicle within the EU, set the country profile for Germany. This country
profile is identical to all the country profiles for EU.
Click the "Set" button.
Installation BAT450-F
Release 03 08/2016
27
Advertisement
Table of Contents
