Table of Contents
Advertisement
7
Command Line Interface
802.1x session-timeout
This command sets the time period after which a connected client must be
re-authenticated. Use the no form to disable 802.1x re-authentication.
Syntax
802.1x session-timeout <seconds>
no 802.1x session-timeout
seconds - The number of seconds. (Range: 0-65535)
Default
0 (Disabled)
Command Mode
Global Configuration
Example
DUAL OUTDOOR(config)#802.1x session-timeout 300
DUAL OUTDOOR(config)#
802.1x supplicant
This command sets the user name and password used for authentication of the
access point when operating as a 802.1x supplicant and enables supplicant
authentication. Use the no form to disable the feature.
Syntax
802.1x supplicant eth_password <password>
802.1x supplicant eth_user <username>
802.1x supplicant wds_password <port> <password>
802.1x supplicant wds_user <port> <username>
802.1x supplicant <eth | wds port>
no 802.1x supplicant <eth | wds port>
• eth_password - Specifies a password for authentication using the Ethernet
port. (Range: 1-32 alphanumeric characters)
• eth_user - Specifies a username for authentication using the Ethernet port.
(Range: 1-32 alphanumeric characters)
• wds_password - Specifies a password for authentication using the
specified WDS port. (Range: 1-32 alphanumeric characters)
• wds_user - Specifies a username for authentication using the specified
WDS port. (Range: 1-32 alphanumeric characters)
• eth - Enables 802.1X supplicant authentication using the Ethernet port.
• wds - Enables 802.1X supplicant authentication using the specified WDS
port.
- port - Specifies a WDS port number. (Range: 1-16 Master; 1 Slave)
7-38
Advertisement
Table of Contents
