Security (Bridge Mode) - Hirschmann BAT54 Installation Manual

Dual-band outdoor access point / bridge
Table of Contents

Advertisement

6
System Configuration
DUAL OUTDOOR#show interface wireless g
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description
Service Type
SSID
Channel
Status
----------------802.11 Parameters--------------------------
Transmit Power
Max Station Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
DTIM Interval
Maximum Association
----------------Security-----------------------------------
Closed System
Multicast cipher
Unicast cipher
WPA clients
WPA Key Mgmt Mode
WPA PSK Key Type
Encryption
Default Transmit Key
Static Keys :
Key 1: EMPTY
Authentication Type
===========================================================
DUAL OUTDOOR#

Security (Bridge Mode)

Wired Equivalent Privacy (WEP) and Advanced Encryption Standard (AES) are
implemented for security in bridge mode to prevent unauthorized access to network
data. To secure bridge link data transmissions, enable WEP or AES encryption for
the bridge radio and set at least one encryption key.
Wired Equivalent Privacy (WEP)
WEP provides a basic level of security, preventing unauthorized access to the
network and encrypting data transmitted between wireless bridge units. WEP uses
static shared keys (fixed-length hexadecimal or alphanumeric strings) that are
manually configured on all units in the wireless bridge network.
6-48
: Enterprise 802.11g Access Point
: Access Point
: r&d
: 11 (AUTO)
: Enable
: FULL (14 dBm)
: 6Mbps
: 512 bytes
: 256 bytes
: 150 TUs
: 5 beacons
: 64 stations
: DISABLED
: WEP
: TKIP
: SUPPORTED
: DYNAMIC
: HEX
: DISABLED
: 1
Key 2: EMPTY
Key 3: EMPTY
: OPEN
Key 4: EMPTY
7-84

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bat54m

Table of Contents