Table of Contents
Advertisement
7
Command Line Interface
interface ethernet
This command enters Ethernet interface configuration mode.
Syntax
interface ethernet
Default Setting
None
Command Mode
Global Configuration
Example
To specify the 10/100Base-TX network interface, enter the following command:
DUAL OUTDOOR(config)#interface ethernet
DUAL OUTDOOR(if-ethernet)#
dns server
This command specifies the address for the primary or secondary domain name
server to be used for name-to-address resolution.
Syntax
dns primary-server <server-address>
dns secondary-server <server-address>
• primary-server - Primary server used for name resolution.
• secondary-server - Secondary server used for name resolution.
• server-address - IP address of domain-name server.
Default Setting
None
Command Mode
Global Configuration
Command Usage
The primary and secondary name servers are queried in sequence.
Example
This example specifies two domain-name servers.
DUAL OUTDOOR(if-ethernet)#dns primary-server 192.168.1.55
DUAL OUTDOOR(if-ethernet)#dns secondary-server 10.1.0.55
DUAL OUTDOOR(if-ethernet)#
Related Commands
show interface ethernet (7-67)
7-64
Advertisement
Table of Contents
