Speed; Channel - Hirschmann BAT54 Installation Manual

speed

This command configures the maximum data rate for transmitting unicast packets on
the wireless interface.
Syntax
speed <speed>
speed - Maximum access speed allowed for remote bridges.
(Options: 802.11a: 6, 9, 12, 18, 24, 36, 48, 54 Mbps; 802.11g:1, 2, 5.5, 6,
9, 11, 12, 18, 24, 36, 48, 54 Mbps)
Default Setting
54 Mbps
Command Mode
Interface Configuration (Wireless)
Command Usage
The maximum transmission distance is affected by the data rate. The lower
the data rate, the longer the transmission distance.
Example
DUAL OUTDOOR(if-wireless a)#speed 6
DUAL OUTDOOR(if-wireless a)#

channel

This command configures the radio channel through which the local wireless bridge
communicates with remote bridges.
Syntax
channel <channel | auto>
• channel - Manually sets the radio channel used for communications with
remote bridges. (Range: 802.11a - 36, 40, 44, 48, 52, 56, 60, 64, 149, 153,
157, 161, 165 for normal mode, and 42, 50, 58, 152, 160 for turbo mode;
802.1g - 1 to 14)
• auto - Automatically selects an unoccupied channel (if available).
Otherwise, the lowest channel is selected.
Default Setting
Automatic channel selection
Command Mode
Interface Configuration (Wireless)
Command Usage
The available channel settings are limited by local regulations, which
determine the number of channels that are available.
Wireless Interface Commands
7
7-71