Table of Contents
Advertisement
the current 802.11g security settings, use the show interface wireless g command
(not shown in example).
AP(config)#interface wireless g
Enter Wireless configuration commands, one per line.
AP(if-wireless g)#authentication open
AP(if-wireless g)#encryption 128
AP(if-wireless g)#wpa-clients required
AP(if-wireless g)#wpa-mode dynamic
AP(if-wireless g)#multicast-cipher TKIP
AP(if-wireless g)#end
AP(config)#802.required
AP(config)#no mac-authentication
Status Information
The Status page includes information on the following items:
Menu
AP Status
Station Status
Event Logs
AP Status
The AP Status window displays basic system configuration settings, as well as the
settings for the wireless interfaces.
Description
Displays configuration settings for the basic system and the wireless
interfaces
Shows wireless clients currently associated with the access point
Shows log messages stored in memory
6
Status Information
7-69
7-76
7-77
7-81
7-82
7-80
7-35
7-41
Page
6-63
6-65
6-67
6-63
Advertisement
Table of Contents
