Prompt; System Name - Hirschmann BAT54 Installation Manual

7
Command Line Interface
Default Setting
US - for units sold in the United States
99 (no country set) - for units sold in other countries
Command Mode
Exec
Command Usage
• If you purchased an wireless bridge outside of the United States, the
country code must be set before radio functions are enabled.
• The available Country Code settings can be displayed by using the country
? command.
Example
DUAL OUTDOOR#country us
DUAL OUTDOOR#

prompt

This command customizes the CLI prompt. Use the no form to restore the default
prompt.
Syntax
prompt string
no prompt
string - Any alphanumeric string to use for the CLI prompt.
(Maximum length: 255 characters)
Default Setting
DUAL OUTDOOR
Command Mode
Global Configuration
Example
DUAL OUTDOOR(config)#prompt RD2
RD2(config)#

system name

This command specifies or modifies the system name for this device. Use the no
form to restore the default system name.
Syntax
system name name
no system name
name - The name of this host.
(Maximum length: 32 characters)
7-12