Event Logs - Hirschmann BAT54 Installation Manual

Event Logs

The Event Logs window shows the log messages generated by the wireless bridge
and stored in memory.
The Event Logs table displays the following information:
• Log Time: The time the log message was generated.
• Event Level: The logging level associated with this message. For a description of
the various levels, see "logging level" on page 6-27.
• Event Message: The content of the log message.
CLI Commands for Displaying the Event Logs – From the global configuration mode,
use the
show logging
DUAL OUTDOOR#show loggging
Logging Information
============================================
Syslog State
Logging Host State
Logging Console State
Server Domain name/IP
Logging Level
Logging Facility Type
=============================================
DUAL OUTDOOR#
command.
: Enabled
: Enabled
: Enabled
: 192.168.1.19
: Alert
: 16
6
Status Information
7-19
6-67