Table of Contents
Advertisement
sntp-server enable
This command enables SNTP client requests for time synchronization with NTP or
SNTP time servers specified by the sntp-server ip command. Use the no form to
disable SNTP client requests.
Syntax
sntp-server enable
no sntp-server enable
Default Setting
Disabled
Command Mode
Global Configuration
Command Usage
The time acquired from time servers is used to record accurate dates and
times for log events. Without SNTP, the wireless bridge only records the time
starting from the factory default set at the last bootup (i.e., 00:14:00,
January 1, 1970).
Example
DUAL OUTDOOR(config)#sntp-server enable
DUAL OUTDOOR(config)#
Related Commands
sntp-server ip (7-20)
show sntp (7-23)
sntp-server date-time
This command sets the system clock.
Default Setting
00:14:00, January 1, 1970
Command Mode
Global Configuration
Example
This example sets the system clock to 17:37 June 19, 2003.
DUAL OUTDOOR#sntp-server date-time
Enter Year<1970-2100>: 2003
Enter Month<1-12>: 6
Enter Day<1-31>: 19
Enter Hour<0-23>: 17
Enter Min<0-59>: 37
DUAL OUTDOOR#
System Clock Commands
7
7-21
Advertisement
Table of Contents
