Command Groups; General Commands - Hirschmann BAT54 Installation Manual

7
Command Line Interface

Command Groups

The system commands can be broken down into the functional groups shown below.
Command Group
General
System Management
System Logging
System Clock
SNMP
Flash/File
RADIUS
Authentication
WDS
Bridge
Filtering
PPPoE
Ethernet Interface
Wireless Interface
IAPP
VLANs
The access mode shown in the following tables is indicated by these abbreviations:
GC (Global Configuration), IC-E (Ethernet Interface Configuration), and IC-W
(Wireless Interface Configuration).

General Commands

Command Function
configure Activates global configuration mode
end Returns to the previous configuration mode
exit Returns to Exec mode, or exits the CLI
ping Sends ICMP echo request packets to another node on the network Exec
reset Restarts the system
show history Shows the command history buffer
show line Shows the configuration settings for the console port
7-6
Description
Basic commands for entering configuration mode, restarting the system,
or quitting the CLI
Controls user name, password, browser management options, and a
variety of other system information
Configures system logging parameters
Configures SNTP and system clock settings
Configures community access strings and trap managers
Manages code image or wireless bridge configuration files
Configures the RADIUS client used with 802.1x authentication
Configures IEEE 802.1x port access control and address filtering
Configures the Wireless Distribution System forwarding table
Configures MAC address table aging time settings and spanning tree
parameters
Filters access to the management interface from wireless nodes, and
filters traffic using specific Ethernet protocol types
Configures parameters for a PPPoE management tunnel on the Ethernet
interface
Configures connection parameters for the Ethernet interface
Configures connection parameters for the wireless interface
Enables roaming between multi-vendor access points
Configures VLAN support
Page
7-6
7-10
7-16
7-20
7-24
7-28
7-31
7-35
7-42
7-46
7-53
7-56
7-63
7-68
7-86
7-86
Mode Page
Exec 7-7
GC, IC 7-7
any 7-7
7-8
Exec 7-9
Exec 7-9
Exec 7-10