Table of Contents
Advertisement
3.4. Interfaces
3.4.1. Overview
Nr. Label
ETH1
1
B1
2
ETH2
B2
3
Reset
4
WLAN
A1 / A2
5
LED Indicators
6
3.4.2. Default LED Indicators
Status LEDs
The following table describes the AP3400 status indicators.
Label
Color
STAT
Link
AP3400
Figure 3.2.: AP3400 Interfaces
Function
2.5 Gbit Ethernet, can be used as LAN or WAN interface. PoE Port
2.5 Gbit Ethernet, can be used as LAN or WAN interface.
Reboot and factory reset button
QLS female connectors for MIMO WLAN antenna, both are main antennas
LED Indicators for Status and Link
M3 earth protection connector, connected to the system ground. Galavnic
isolated to power supply
Table 3.2.: AP3400 Interfaces
State
Function
on
The device is ready.
on
System boot failure: recovery mode
on
The device is busy due to startup
on
One Wi-Fi radio module is up and has at least 1 client associated
on
Failure on WLAN operation
Table 3.3.: AP3400 Status Indicators
14
User Manual for version 1.9.1
Advertisement
Table of Contents
