Install The Slide Assemblies - Sun Microsystems Fire V490 Setup And Rackmounting Manual

Install the Slide Assemblies

1. Use the Rack Alignment template to locate and mark mounting holes on the
vertical rack rails.
See "Locate the Mounting Holes" on page
2. Adjust the back mounting brackets to accommodate the depth of the rack.
a. Loosen the three 8-32 lock nuts that secure the back mounting bracket to the
slide assembly.
b. Position a slide assembly in the cabinet where you marked the mounting holes.
Slide assembly
9.
8-32
Lock nut
Back mounting bracket
Chapter 1 Installing a Sun Fire V490 Server Into a 4-Post Cabinet 11