Adj 5.3 Home Position Sensor Plate - Xerox Document Workcenter 150 Service Manual

ADJ 5.3
Home Position Sensor Plate
Purpose
Ensures the Home Position Sensor Plate is
positioned property to allow the Home Sensor to
detect the Carriage at power on or following a
cleared error condition.
Adjustment
1. Position the Home Position Sensor Plate with
the dght edge aligned with the left most
alignment mark (third line from the center line)
(Figure 1).
Adjustment Screw
Sensor Plate
Figure 1 Positioning the Home Position Sensor Plate
I
:9 ,
Document Workcenter 150
5/96
4.45
ADJ 5.3 Home Position Sensor Plate