Show Running-Config Interface; Show - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

show running-config interface

Use this command to display the running configuration for a specific interface . Valid interfaces include physical,
LAG, loopback, tunnel and VLAN interfaces .
show running-config interface {interface | lag {lag-intf-num} | loopback
Format
{loopback-id} | tunnel {tunnel-id} | vlan {vlan-id}}
Mode Privileged EXEC
Parameter
interface
lag-intf-num
loopback-id
tunnel-id
vlan-id
The following information is displayed for the command .
Term
slot/port
lag
loopback
tunnel
vlan
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show running-config interface 0/1
!Current Configuration:
!
interface 0/1
addport 3/1
exit
(UBNT EdgeSwitch) #

show

This command displays the content of text-based configuration files from the CLI . The text-based configuration
files (startup-config, backup-config and factory-defaults) are saved compressed in flash . With this command, the
files are decompressed while displaying their content .
show { startup-config | backup-config | factory-defaults }
Format
Mode Privileged EXEC
Parameter
startup-config
backup-config
factory-defaults
Example: The following shows an example of the output from the command when the
parameter is specified .
(UBNT EdgeSwitch) #show startup-config
!Current Configuration:
!
!System Description "EdgeSwitch 24-Port 500W, 0.8.0.4712594, Linux 3.6.5-f4a26ed5"
Ubiquiti Networks, Inc.
Description
Running configuration for the specified interface.
Running configuration for the LAG interface.
Running configuration for the loopback interface.
Running configuration for the tunnel interface.
Running configuration for the VLAN routing interface.
Description
Enter an interface in slot/port format.
Display the running config for a specified lag interface.
Display the running config for a specified loopback interface.
Display the running config for a specified tunnel interface.
Display the running config for a specified vlan routing interface.
Description
Display the content of the startup-config file.
Display the content of the backup-config file.
Display the content of the factory-defaults file.
Utility Commands
startup-config
120