Show Interfaces Status; Show Interfaces Traffic - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference
The display parameters, when the argument is slot/port, are as follows:
Parameters
Packets Received Without
Error
Packets Received With Error
Broadcast Packets Received
Receive Packets Discarded
Packets Transmitted Without
Error
Transmit Packets Discarded
Transmit Packets Errors
Collisions Frames
Time Since Counters Last
Cleared
The display parameters, when the argument is switchport, are as follows:
Term
Packets Received Without
Error
Broadcast Packets Received
Packets Received With Error
Packets Transmitted Without
Error
Broadcast Packets
Transmitted
Transmit Packet Errors
Time Since Counters Last
Cleared

show interfaces status

Use this command to display interface information, including the description, port state, speed and auto-
neg capabilities . The command is similar to
description and port-capability .
The description of the interface is configurable through the existing command description <name> which
has a maximum length of 64 characters that is truncated to 28 characters in the output . The long form of the
description can be displayed using show port description . The interfaces displayed by this command are physical
interfaces, LAG interfaces and VLAN routing interfaces .
show interfaces status [slot/port]
Format
Mode Privileged EXEC

show interfaces traffic

Use this command to display interface traffic information .
show interfaces traffic [slot/port]
Format
Mode Privileged EXEC
Ubiquiti Networks, Inc.
Definition
The total number of packets (including broadcast packets and multicast packets) received by the
processor.
The number of inbound packets that contained errors preventing them from being deliverable to a
higher-layer protocol.
The total number of packets received that were directed to the broadcast address. Note that this does
not include multicast packets.
The number of inbound packets which were chosen to be discarded even though no errors had
been detected to prevent their being deliverable to a higher-layer protocol. One possible reason for
discarding such a packet could be to free up buffered space.
The total number of packets transmitted out of the interface.
The number of outbound packets which were chosen to be discarded even though no errors had
been detected to prevent their being deliverable to a higher-layer protocol. A possible reason for
discarding a packet could be to free up buffer space.
The number of outbound packets that could not be transmitted because of errors.
The best estimate of the total number of collisions on this Ethernet segment.
The elapsed time, in days, hours, minutes, and seconds since the statistics for this port were last
cleared.
Definition
The total number of packets (including broadcast packets and multicast packets) received by the
processor.
The total number of packets received that were directed to the broadcast address. Note that this does
not include multicast packets.
The number of inbound packets that contained errors preventing them from being deliverable to a
higher-layer protocol.
The total number of packets transmitted out of the interface.
The total number of packets that higher-level protocols requested to be transmitted to the Broadcast
address, including those that were discarded or not sent.
The number of outbound packets that could not be transmitted because of errors.
The elapsed time, in days, hours, minutes, and seconds since the statistics for this switch were last
cleared.
show port all
but displays additional fields like interface
Utility Commands
109