Show Rmon - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference
Example: The following shows an example of the command .
(UBNT EdgeSwitch) (Interface 0/1-0/10)#rmon collection history 1 buckets 10 interval 30 owner
myOwner
Error: 'rmon collection history' is not supported on range of interfaces.
no rmon collection history
This command will delete the history control group entry with the specified index number .
no rmon collection history index-number
Format
Mode Interface Config
Example: The following shows an example of the command .
(UBNT EdgeSwitch) (Interface 0/1-0/10)# no rmon collection history 1

show rmon

This command displays the entries in the RMON alarm table .
show rmon {alarms | alarm alarm-index}
Format
Mode Privileged Exec
Parameter
Alarm Index
Alarm Variable
Alarm Interval
Alarm Absolute Value
Alarm Rising
Threshold
Alarm Rising Event
Index
Alarm Falling
Threshold
Alarm Falling Event
Index
Alarm Startup Alarm
Alarm Owner
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show rmon alarms
Index OID
----------------------------------------------
1 alarmInterval.1
2 alarmInterval.1
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show rmon alarm 1
Alarm 1
----------
OID: alarmInterval.1
Last Sample Value: 1
Ubiquiti Networks, Inc.
Description
An index that uniquely identifies an entry in the alarm table. Each entry defines a diagnostic sample at
a particular interval for an object on the device. The range is 1 to 65535.
The object identifier of the particular variable to be sampled. Only variables that resolve to an ASN.1
primitive type of integer.
The interval in seconds over which the data is sampled and compared with the rising and falling
thresholds. The range is 1 to 2147483647. The default is 1.
The value of the statistic during the last sampling period. This object is a read-only, 32-bit signed value.
The rising threshold for the sample statistics. The range is 2147483648 to 2147483647. The default is 1.
The index of the eventEntry that is used when a rising threshold is crossed. The range is 1 to 65535.
The default is 1.
The falling threshold for the sample statistics. The range is 2147483648 to 2147483647. The default is
1.
The index of the eventEntry that is used when a falling threshold is crossed. The range is 1 to 65535.
The default is 2.
The alarm that may be sent. Possible values are rising, falling or both rising-falling. The default is rising-
falling.
The owner string associated with the alarm entry. The default is monitorAlarm.
Owner
MibBrowser
MibBrowser
Utility Commands
183