Statistics Application Commands; Stats Group - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

Statistics Application Commands

The statistics application gives you the ability to query for statistics on port utilization, flow-based and packet
reception on programmable time slots . The statistics application collects the statistics at a configurable time
range . You can specify the port number(s) or a range of ports for statistics to be displayed . The configured time
range applies to all ports . Detailed statistics are collected between a specified time range in date and time
format . You can define the time range as having an absolute time entry and/or a periodic time . For example, you
can specify the statistics to be collected and displayed between 9:00 12 NOV 2011 (START) and 21:00 12 NOV
2012 (END) or schedule it on every Mon, Wed, and Fri 9:00 (START) to 21:00 (END) .
You can receive the statistics in the following ways:
• User requests through the CLI for a set of counters .
• Configuring the device to display statistics using syslog or email alert . The syslog or email alert messages are
sent by the statistics application at END time .

stats group

This command creates a new group with the specified id or name and configures the time range and the
reporting mechanism for that group .
stats group group-id|name timerange time-range-name reporting list-of-reporting-
Format
methods
Mode Global Config
Parameter
group-id|name
time-range-name
list-of-reporting-
methods
Example: The following shows examples of the command .
(UBNT EdgeSwitch) (Config)# stats group received-errors timerange test reporting email syslog
(UBNT EdgeSwitch) (Config)# stats group received-transmitted timerange test reporting none
no stats group
This command deletes the configured group .
no stats group group id|name
Format
Mode Global Config
Example: The following shows examples of the command .
(UBNT EdgeSwitch) (Config)# no stats group received
(UBNT EdgeSwitch) (Config)# no stats group received-errors
(UBNT EdgeSwitch) (Config)# no stats group received-transmitted
Ubiquiti Networks, Inc.
Description
Name of the group of statistics or its identifier to apply on the interface. The range is:
1. received
2. received-errors
3. transmitted
4. transmitted-errors
5. received-transmitted
6. port-utilization
7. congestion
The default is None.
Name of the time range for the group or the flow-based rule. The range is 1 to 31 alphanumeric
characters. The default is None.
Report the statistics to the configured method. The range is:
0. none
1. console
2. syslog
3. e-mail
The default is None.
Utility Commands
191