Lldp-Med Commands; Lldp Med; Lldp Med Confignotification; Lldp Med Transmit-Tlv - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

LLDP-MED Commands

Link Layer Discovery Protocol - Media Endpoint Discovery (LLDP-MED) (ANSI-TIA-1057) provides an extension
to the LLDP standard . Specifically, LLDP-MED provides extensions for network configuration and policy, device
location, Power over Ethernet (PoE) management and inventory management .

lldp med

Use this command to enable MED on an interface or a range of interfaces . By enabling MED, you will be
effectively enabling the transmit and receive function of LLDP .
Default disabled
lldp med
Format
Mode Interface Config
no lldp med
Use this command to disable MED .
no lldp med
Format
Mode Interface Config

lldp med confignotification

Use this command to configure an interface or a range of interfaces to send the topology change notification .
Default
disabled
lldp med confignotification
Format
Mode Interface Config
no lldp med confignotification
Use this command to disable notifications .
no lldp med confignotification
Format
Mode Interface Config

lldp med transmit-tlv

Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED set will be transmitted
in the Link Layer Discovery Protocol Data Units (LLDPDUs) from this interface or a range of interfaces .
Default By default, the capabilities and network policy TLVs are included.
lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse] [inventory] [location]
Format
[network-policy]
Mode Interface Config
Parameter
capabilities
ex-pd
ex-pse
inventory
location
network-policy
Ubiquiti Networks, Inc.
Definition
Transmit the LLDP capabilities TLV.
Transmit the LLDP extended PD TLV.
Transmit the LLDP extended PSE TLV.
Transmit the LLDP inventory TLV.
Transmit the LLDP location TLV.
Transmit the LLDP network policy TLV.
Switching Commands
300