Show Mac-Address-Table Static; Show Mac-Address-Table Staticfiltering - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

show mac-address-table static

This command displays the Static MAC Filtering information for all Static MAC Filters . If you specify all, all the
Static MAC Filters in the system are displayed . If you supply a value for macaddr, you must also enter a value for
vlanid, and the system displays Static MAC Filter information only for that MAC address and VLAN .
show mac-address-table static {macaddr vlanid | all}
Format
Mode Privileged EXEC
Term
MAC Address
VLAN ID
Source Port(s)
Note: Only multicast address filters will have destination port lists .

show mac-address-table staticfiltering

This command displays the Static Filtering entries in the Multicast Forwarding Database (MFDB) table .
show mac-address-table staticfiltering
Format
Mode Privileged EXEC
Term
VLAN ID
MAC Address
Type
Description
Interfaces
Ubiquiti Networks, Inc.
Definition
The MAC Address of the static MAC filter entry.
The VLAN ID of the static MAC filter entry.
The source port filter set's slot and port(s).
Definition
The VLAN in which the MAC Address is learned.
A unicast MAC address for which the switch has forwarding and or filtering information. As the data is
gleaned from the MFDB, the address will be a multicast address. The format is six 2-digit hexadecimal
numbers that are separated by colons, for example 01:23:45:67:89:AB.
The type of the entry. Static entries are those that are configured by the end user. Dynamic entries are
added to the table as a result of a learning process or protocol.
The text description of this multicast table entry.
The list of interfaces that are designated for forwarding (Fwd:) and filtering (Flt:).
Switching Commands
273