Show Snmp; Show Snmp Engineid; Show Snmp Filters - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

show snmp

This command displays the current SNMP configuration .
show snmp
Format
Mode Privileged EXEC
Term
Community Table:
Community-String
Community-Access
View Name
IP Address
Community Group Table:
Community-String
Group Name
IP Address
Host Table:
Target Address
Type
Community
Version
UDP Port
Filter name
TO Sec
Retries

show snmp engineID

This command displays the currently configured SNMP engineID .
show snmp engineID
Format
Mode
Privileged EXEC
Term
Local SNMP EnginID

show snmp filters

This command displays the configured filters used when sending traps .
show snmp filters [filtername]
Format
Mode Privileged EXEC
Term
Name
OID Tree
Type
Ubiquiti Networks, Inc.
Definition
The community string for the entry. This is used by SNMPv1 and SNMPv2 protocols to access the
switch.
The type of access the community has:
• Read only
• Read write
• su
The view this community has access to.
Access to this community is limited to this IP address.
The community this maping configures
The group this community is assigned to.
The IP address this community is limited to.
The address of the host that traps will be sent to.
The type of message that will be sent, either traps or informs.
The community traps will be sent to.
The version of SNMP the trap will be sent as.
The UDP port the trap or inform will be sent to.
The filter the traps will be limited by for this host.
The number of seconds before informs will time out when sending to this host.
The number of times informs will be sent after timing out.
Definition
The current configuration of the displayed SNMP engineID.
Definition
The filter name for this entry.
The OID tree this entry will include or exclude.
Indicates if this entry includes or excludes the OID Tree.
Management Commands
79