Show Ip Dhcp Snooping Binding; Show Ip Dhcp Snooping Database; Show Ip Dhcp Snooping Interfaces - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

show ip dhcp snooping binding

Use this command to display the DHCP Snooping binding entries . To restrict the output, use the following options:
• Dynamic: Restrict the output based on DCHP snooping .
• Interface: Restrict the output based on a specific interface .
• Static: Restrict the output based on static entries .
• VLAN: Restrict the output based on VLAN .
show ip dhcp snooping binding [{static|dynamic}] [interface slot/port] [vlan id]
Format
Mode • Privileged EXEC
• User EXEC
Term
MAC Address
IP Address
VLAN
Interface
Type
Lease (sec)
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show ip dhcp snooping binding
Total number of bindings: 2
MAC Address IP Address
------------------ ------------
00:02:B3:06:60:80 210.1.1.3
00:0F:FE:00:13:04 210.1.1.4

show ip dhcp snooping database

Use this command to display the DHCP Snooping configuration related to the database persistency .
show ip dhcp snooping database
Format
Mode • Privileged EXEC
• User EXEC
Term
Agent URL
Write Delay
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show ip dhcp snooping database
agent url: /10.131.13.79:/sai1.txt
write-delay: 5000

show ip dhcp snooping interfaces

Use this command to show the DHCP Snooping status of the interfaces .
show ip dhcp snooping interfaces
Format
Mode Privileged EXEC
Ubiquiti Networks, Inc.
Definition
Displays the MAC address for the binding that was added. The MAC address is the key to the binding
database.
Displays the valid IP address for the binding rule.
The VLAN for the binding rule.
The interface to add a binding into the DHCP snooping interface.
Binding type; statically configured from the CLI or dynamically learned.
The remaining lease time for the entry.
VLAN Interface
---- ---------
10 0/1
10 0/1
Definition
Bindings database agent URL.
The maximum write time to write the database into local or remote.
Type Lease time (Secs)
---- ------------------
86400
86400
Switching Commands
278