Ip Icmp Error-Interval - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

ip icmp error-interval

Use this command to limit the rate at which IPv4 ICMP error messages are sent . The rate limit is configured as a
token bucket, with two configurable parameters,
burst-interval
The
burst-interval
The
ICMP error messages that can be sent during one burst-interval . The range is from 1 to 200 messages . To
disable ICMP rate limiting, set
burst-interval
Default
burst-size
ip icmp error-interval burst-interval [burst-size]
Format
Mode Global Config
no ip icmp error-interval
no
Use the form of the command to return
no ip icmp error-interval
Format
Mode
Global Config
Ubiquiti Networks, Inc.
burst-size
specifies how often the token bucket is initialized with
is from 0 to 2147483647 milliseconds (msec) . The
burst-interval
to zero (0) .
of 1000 msec
of 100 messages
burst-interval
Routing Commands
and burst-interval .
burst-size
burst-size
burst-size
and to their default values .
tokens .
is the number of
359