Show Ip Route Ecmp-Groups - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference
Example: The following shows example CLI display output for the command to indicate a truncated route .
(UBNT EdgeSwitch) #show ip route
Route Codes: C - Connected, S - Static
O E1 100.1.161.0/24 [110/10] via 172.20.11.100,
O E1 100.1.162.0/24 [110/10] via 172.20.11.100,
O E1 100.1.163.0/24 [110/10] via 172.20.11.100,

show ip route ecmp-groups

This command reports all current ECMP groups in the IPv4 routing table . An ECMP group is a set of two or more
next hops used in one or more routes . The groups are numbered arbitrarily from 1 to n . The output indicates the
number of next hops in the group and the number of routes that use the set of next hops . The output lists the
IPv4 address and outgoing interface of each next hop in each group .
show ip route ecmp-groups
Format
Mode Privileged Exec
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show ip route ecmp-groups
ECMP Group 1 with 2 next hops (used by 1 route)
172.20.33.100 on interface 2/33
172.20.34.100 on interface 2/34
ECMP Group 2 with 3 next hops (used by 1 route)
172.20.32.100 on interface 2/32
172.20.33.100 on interface 2/33
172.20.34.100 on interface 2/34
ECMP Group 3 with 4 next hops (used by 1 route)
172.20.31.100 on interface 2/31
172.20.32.100 on interface 2/32
172.20.33.100 on interface 2/33
172.20.34.100 on interface 2/34
show ip route summary
This command displays a summary of the state of the routing table . When the optional
some statistics, such as the number of routes from each source, include counts for alternate routes . An alternate
route is a route that is not the most preferred route to its destination and therefore is not installed in the
forwarding table . To include only the number of best routes, do not use the optional keyword .
show ip route summary [all]
Format
Modes • Privileged EXEC
• User EXEC
Term
Connected Routes
Static Routes
RIP Routes
BGP Routes
External
Internal
Local
Ubiquiti Networks, Inc.
Definition
The total number of connected routes in the routing table.
Total number of static routes in the routing table.
Total number of routes installed by RIP protocol.
Total number of routes installed by the BGP protocol.
The number of external BGP routes.
The number of internal BGP routes.
The number of local BGP routes.
Routing Commands
00h:00m:13s, 2/11 T
00h:00m:13s, 2/11 T
00h:00m:13s, 2/11 T
all
keyword is given,
329