Show Users; Show Users Long; Show Users Accounts - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

show users

This command displays the configured user names and their settings . The
truncated user names . Use the
show users
command is only available for users with Read/Write privileges . The SNMPv3 fields will only be
displayed if SNMP is available on the system .
show users
Format
Mode Privileged EXEC
Term
User Name
Access Mode
SNMPv3 Access Mode
SNMPv3 Authentication
SNMPv3 Encryption

show users long

This command displays the complete usernames of the configured users on the switch .
show users long
Format
Mode Privileged EXEC
Example: The following shows an example of the command .
(UBNT EdgeSwitch) #show users long
User Name
------------
ubnt
test1111test1111test1111test1111

show users accounts

This command displays local user status with respect to user account lockout and password aging . Displayed
user names are truncated . Use the
show users accounts [detail]
Format
Mode Privileged EXEC
Term
User Name
Access Level
Password Aging
Password Expiry Date
Lockout
detail
If the keyword is included, the following additional fields are displayed .
Term
Password Override
Complexity Check
Password Strength
Ubiquiti Networks, Inc.
show users long
Definition
The name the user enters to login using the serial port, telnet or web.
Shows whether the user is able to change parameters on the switch (Read/Write) or is only able to
view them (Read Only). As a factory default, the "ubnt" user has Read/Write access.
The SNMPv3 Access Mode. If the value is set to ReadWrite, the SNMPv3 user is able to set and retrieve
parameters on the system. If the value is set to ReadOnly, the SNMPv3 user is only able to retrieve
parameter information. The SNMPv3 access mode may be different than the CLI and web access mode.
The authentication protocol to be used for the specified login user.
The encryption protocol to be used for the specified login user.
show users long
Definition
The local user account's user name.
The user's access level (1 for read-only or 15 for read/write).
Number of days, since the password was configured, until the password expires.
The current password expiration date in date format.
Indicates whether the user account is locked out (true or false).
Definition
Displays the user's Password override complexity check status. By default it is disabled.
Displays the user password's strength (Strong or Weak). This field is displayed only if the Password
Strength feature is enabled.
show users
command to display the complete user names . The
command to show the complete user names .
Management Commands
command displays
58