EdgeSwitch CLI Command Reference
PoE Management Commands
This section lists the available PoE commands on the EdgeSwitch .
show poe counters
This command displays the related counters of PoE status on specific port(s) .
show poe counters {all | intf-range}
Format
Mode
Privileged EXEC
Term
Intf
MPS Absent
Invalid Signature
Power Denied
Over Load
Short Counter
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show poe counters all
MPS
Invalid
Intf
Absent Signature Denied Load Counter
--------- ------ --------- ------ ---- -------
0/1
0
3298
0/2
0
3298
0/3
0
3298
0/4
0
3298
0/5
0
3947
0/6
0
3947
...
clear poe counters
This command clears the related counter of PoE status on specific port(s) .
clear poe counters {all | intf-range}
Format
Mode
Privileged EXEC
show poe port
This command displays the PoE configuration of specific ports .
show poe port {all | intf-range}
Format
Mode
Privileged EXEC
Term
Intf
OP Mode
HP Enable
HP Mode
Detect Enable
Disconnect Enable
Class Enable
Ubiquiti Networks, Inc.
Description
The valid PoE slot/port number.
Number of times the powered device has no longer requested power from the port (MPS is the
Maintenance Power Signature.)
Counter of invalid signature in specific PoE port.
Counter of power denied in specific PoE port.
Counter of over loading in specific PoE port.
Counter of short in specific PoE port.
Power
Over Short
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Description
The valid PoE slot/port number.
PoE Operational Mode
High Power Enable
High Power Mode
Detect Enable
Disconnect Enable
Class Enable
Power over Ethernet (PoE) Commands
415