Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual page 141

EdgeSwitch CLI Command Reference
source destination
Replace the and
page 141 . For the url source or destination, use one of the following values:
{xmodem | tftp://ipaddr|hostname | ip6address|hostname/filepath/filename
[noval] | ftp://user@ipaddress | hostname/filepath/filename}
verify noverify
The |
enabled (see "file verify" on page 143) . The
will be performed for the specified downloaded image or configuration file . The
specifies that no verification will be performed .
ias-users
The keyword
is downloaded, the switch IAS user's database is replaced with the users and its attributes available in the
downloaded file . In the command
users file:
{ { tftp://ipaddr|hostname | ipv6address|hostname/filepath/filename }
{ sftp | scp://username@ipaddress/filepath/filename} }
Note: The maximum length for the file path is 160 characters, and the maximum length for the file name is
31 characters .
For FTP, TFTP, SFTP, and SCP, the
filepath
is the path to the file, and
username
SFTP and SCP, the
ip6address
Note:
Remember to upload the existing fastpath .cfg file off the switch prior to loading a new release
CAUTION:
image in order to make a backup .
Source
nvram:backup-config
nvram:clibanner
nvram:cpupktcapture.
pcap
nvram:crash-log
nvram:errorlog
nvram:factory-
defaults
nvram:fastpath.cfg
nvram:log
nvram:operational-
log
nvram:script
scriptname
nvram:startup-config
nvram:startup-config
nvram:startup-log
nvram:traplog
system:running-
config
Ubiquiti Networks, Inc.
parameters with the options in "Table 11. Copy Parameters" on
parameters are only available if the image/configuration verify options feature is
verify
supports the downloading of the IAS user database file . When the IAS users file
copy url ias-users, for
ipaddr|hostname
filename
parameter is the username for logging into the remote server via SSH .
is also a valid parameter for routing packages that support IPv6 .
Table 11. Copy Parameters
Destination
nvram:startup-config
url
url
url
url
url
url
url
url
url
nvram:backup-config
url
url
url
nvram:startup-config
parameter specifies that digital signature verification
url
one of the following is used for the IAS
parameter is the IP address or host name of the server,
is the name of the file you want to upload or download . For
Description
Copies the backup configuration to the startup configuration.
Copies the CLI banner to a server.
Uploads CPU packets capture file.
Copies the crash log to a server.
Copies the error log file to a server.
Uploads factory defaults file.
Uploads the binary config file to a server.
Copies the log file to a server.
Copies the operational log file to a server.
Copies a specified configuration script file to a server.
Copies the startup configuration to the backup configuration.
Copies the startup configuration to a server.
Uploads the startup log file.
Copies the trap log file to a server.
Saves the running configuration to NVRAM.
Utility Commands
noverify
parameter
|
141