Aaa Session-Id; Aaa Accounting - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

aaa session-id

Use this command in Global Config mode to specify if the same session-id is used for Authentication,
Authorization and Accounting service type within a session .
Default common
aaa session-id [common | unique]
Format
Mode Global Config
Parameter
common
unique
no aaa session-id
Use this command in Global Config mode to reset the aaa session-id behavior to the default .
no aaa session-id [unique]
Format
Mode Global Config

aaa accounting

Use this command in Global Config mode to create an accounting method list for user EXEC sessions, user-
executed commands, or 802 .1X . This list is identified by
Accounting records, when enabled for a line-mode, can be sent at both the beginning and at the end
stop) or only at the end (stop-only) . If
tacacs
If is specified as the accounting method, accounting records are notified to a TACACS+ server .
radius
If is the specified accounting method, accounting records are notified to a RADIUS server .
Note: Please note the following:
• A maximum of five Accounting Method lists can be created for each exec and commands type .
• Only the default Accounting Method list can be created for 802 . 1 X . There is no provision to create more .
• The same list-name can be used for both exec and commands accounting type
• AAA Accounting for commands with RADIUS as the accounting method is not supported .
• Start-stop or None are the only supported record types for 802 .1X accounting . Start-stop enables
accounting and None disables accounting .
• RADIUS is the only accounting method type supported for 802 .1X accounting .
aaa accounting {exec | commands | dot1x} {default | list_name}
Format
{start-stop | stop-only |none} method1 [method2...]
Mode Global Config
Parameter
exec
commands
dot1x
default
list-name
start-stop
stop-only
none
method
Ubiquiti Networks, Inc.
Definition
Use the same session-id for all AAA Service types.
Use a unique session-id for all AAA Service types.
none
is specified, then accounting is disabled for the specified list .
Definition
Provides accounting for a user EXEC terminal sessions.
Provides accounting for all user executed commands.
Provides accounting for 802.1X user commands.
The default list of methods for accounting services.
Character string used to name the list of accounting methods.
Sends a start accounting notice at the beginning of a process and a stop accounting notice at the
beginning of a process and a stop accounting notice at the end of a process.
Sends a stop accounting notice at the end of the requested user process.
Disables accounting services on this line.
tacacs radius
Use either or
default
or a user-specified
server for accounting purposes.
Management Commands
list_name.
(start-
67