Spanning-Tree Mst; Spanning-Tree Mst Instance - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference
no spanning-tree max-hops
This command sets the Bridge Max Hops parameter for the common and internal spanning tree to the
default value .
no spanning-tree max-hops
Format
Mode Global Config

spanning-tree mst

This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance or in
the common and internal spanning tree . If you specify an
multiple spanning tree instance, the configurations are done for that multiple spanning tree instance . If you
specify 0 (defined as the default CIST ID) as the mstid, the configurations are done for the common and
internal spanning tree instance .
cost
If you specify the option, the command sets the path cost for this port within a multiple spanning tree
instance or the common and internal spanning tree instance, depending on the mstid parameter . You can set the
path cost as a number in the range of 1 to 200000000 or auto . If you select
based on Link Speed .
port-priority
If you specify the
multiple spanning tree instance or the common and internal spanning tree instance, depending on the
parameter . The port-priority value is a number in the range of 0 to 240 in increments of 16 .
• cost: auto
Default
• port-priority: 128
spanning-tree mst mstid {{cost 1-200000000 | auto} | port-priority 0-240}
Format
Mode Interface Config
no spanning-tree mst
This command sets the Path Cost or Port Priority for this port within the multiple spanning tree instance, or in
the common and internal spanning tree to the respective default values . If you specify an
that corresponds to an existing multiple spanning tree instance, you are configuring that multiple spanning tree
instance . If you specify 0 (defined as the default CIST ID) as the mstid, you are configuring the common and
internal spanning tree instance .
If you specify cost, this command sets the path cost for this port within a multiple spanning tree instance or
the common and internal spanning tree instance, depending on the
i .e ., a path cost value based on the Link Speed .
If you specify port-priority, this command sets the priority for this port within a specific multiple spanning
tree instance or the common and internal spanning tree instance, depending on the
default value .
no spanning-tree mst mstid {cost | port-priority}
Format
Mode Interface Config

spanning-tree mst instance

This command adds a multiple spanning tree instance to the switch . The parameter
a range of 1 to 4094, that corresponds to the new instance ID to be added . The maximum number of multiple
instances supported by the switch is 4 .
Default none
spanning-tree mst instance mstid
Format
Mode Global Config
Ubiquiti Networks, Inc.
mstid
option, this command sets the priority for this port within a specific
Switching Commands
parameter that corresponds to an existing
auto
the path cost value is set
mstid
mstid
parameter, to the default value,
mstid
mstid
is a number within
mstid
parameter
parameter, to the
206