Show Lldp Remote-Device Detail - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference
0/1
0/2
0/3
0/4
0/5
0/6
0/7 2 00:FC:E3:90:01:0F
0/7 3 00:FC:E3:90:01:0F
0/7 4 00:FC:E3:90:01:0F
0/7 5 00:FC:E3:90:01:0F
0/7 1 00:FC:E3:90:01:0F
0/7 6 00:FC:E3:90:01:0F
0/8
0/9
0/10
0/11
0/12
--More-- or (q)uit

show lldp remote-device detail

Use this command to display detailed information about remote devices that transmit current LLDP data to an
interface on the system .
show lldp remote-device detail slot/port
Format
Mode Privileged EXEC
Term
Local Interface
Remote Identifier
Chassis ID Subtype
Chassis ID
Port ID Subtype
Port ID
System Name
System Description
Port Description
System Capabilities
Supported
System Capabilities Enabled
Management Address
Time To Live
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show lldp remote-device detail 0/7
LLDP Remote Device Detail
Local Interface: 0/7
Remote Identifier: 2
Chassis ID Subtype: MAC Address
Chassis ID: 00:FC:E3:90:01:0F
Ubiquiti Networks, Inc.
00:FC:E3:90:01:11
00:FC:E3:90:01:12
00:FC:E3:90:01:13
00:FC:E3:90:01:14
00:FC:E3:90:03:11
00:FC:E3:90:04:11
Definition
The interface that received the LLDPDU from the remote device.
An internal identifier to the switch to mark each remote device to the system.
The type of identification used in the Chassis ID field.
The chassis of the remote device.
The type of port on the remote device.
The port number that transmitted the LLDPDU.
The system name of the remote device.
Describes the remote system by identifying the system name and versions of hardware, operating
system, and networking software supported in the device.
Describes the port in an alpha-numeric format. The port description is configurable.
Indicates the primary function(s) of the device.
Shows which of the supported system capabilities are enabled.
For each interface on the remote device with an LLDP agent, lists the type of address the remote LLDP
agent uses and specifies the address used to obtain information related to the device.
The amount of time (in seconds) the remote device's information received in the LLDPDU should be
treated as valid information.
Switching Commands
298