EdgeSwitch CLI Command Reference
no lldp notification-interval
Use this command to return the notification interval to the default value .
no lldp notification-interval
Format
Mode
Global Config
clear lldp statistics
Use this command to reset all LLDP statistics, including MED-related information .
clear lldp statistics
Format
Mode
Privileged Exec
clear lldp remote-data
Use this command to delete all information from the LLDP remote data table, including MED-related
information .
clear lldp remote-data
Format
Mode
Global Config
show lldp
Use this command to display a summary of the current LLDP configuration .
show lldp
Format
Mode
Privileged Exec
Term
Transmit Interval
Transmit Hold Multiplier
Re-initialization Delay
Notification Interval
show lldp interface
Use this command to display a summary of the current LLDP configuration for a specific interface or for all
interfaces .
show lldp interface {slot/port | all}
Format
Mode
Privileged Exec
Term
Interface
Link
Transmit
Receive
Notify
TLVs
Mgmt
Ubiquiti Networks, Inc.
Definition
How frequently the system transmits local data LLDPDUs, in seconds.
The multiplier on the transmit interval that sets the TTL in local data LLDPDUs.
The delay before reinitialization, in seconds.
How frequently the system sends remote data change notifications, in seconds.
Definition
The interface in a slot/port format.
Shows whether the link is up or down.
Shows whether the interface transmits LLDPDUs.
Shows whether the interface receives LLDPDUs.
Shows whether the interface sends remote data change notifications.
Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can be 0 (Port
Description), 1 (System Name), 2 (System Description), or 3 (System Capability).
Shows whether the interface transmits system management address information in the LLDPDUs.
Switching Commands
296