Radius Server Key - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference
the command . If you use the optional
when connecting to the configured RADIUS server . The
Note: To reconfigure a RADIUS authentication server to use the default UDP port, set the
parameter to 1812 .
acct
If you use the parameter, the command configures the IP address or hostname to use for the RADIUS
accounting server . You can only configure one accounting server . If an accounting server is currently configured,
no
use the form of the command to remove it from the configuration . The IP address or hostname you specify
must match that of a previously configured accounting server . If you use the optional
command configures the UDP port to use when connecting to the RADIUS accounting server . If a port is already
configured for the accounting server, the new port replaces the previously configured port . The
must be in the range 0-65535, with a default of 1813 .
Note: To reconfigure a RADIUS accounting server to use the default UDP port, set the
to 1813 .
radius server host {auth | acct} {ipaddr|dnsname} [name servername] [port 0-65535]
Format
Mode Global Config
Parameter
ipaddr
dnsname
0-65535
servername
no radius server host
no
The form of this command deletes the configured server entry from the list of configured RADIUS servers .
If the RADIUS authenticating server being removed is the active server in the servers that are identified by the
same server name, then the RADIUS client selects another server for making RADIUS transactions . If
used, the previously configured RADIUS authentication server is removed from the configuration . Similarly,
acct
if is used, the previously configured RADIUS accounting server is removed from the configuration . The
ipaddr|dnsname
parameter must match the IP address or DNS name of the previously configured RADIUS
authentication/accounting server .
no radius server host {auth | acct} {ipaddr|dnsname}
Format
Mode Global Config
Example: The following shows an example of the command .
(UBNT EdgeSwitch) (Config) #radius server host acct 192.168.37.60
(UBNT EdgeSwitch) (Config) #radius server host acct 192.168.37.60 port 1813
(UBNT EdgeSwitch) (Config) #radius server host auth 192.168.37.60 name Network1_RS port 1813
(UBNT EdgeSwitch) (Config) #radius server host acct 192.168.37.60 name Network2_RS
(UBNT EdgeSwitch) (Config) #no radius server host acct 192.168.37.60

radius server key

This command configures the key to be used in RADIUS client communication with the specified server .
Depending on whether the
authentication or RADIUS accounting server . The IP address or hostname provided must match a previously
configured server . When this command is executed, the secret is prompted .
Text-based configuration supports RADIUS server's secrets in encrypted and non-encrypted format . When you save
the configuration, these secret keys are stored in encrypted format only . If you want to enter the key in encrypted
format, enter the key along with the encrypted keyword . In the
these secret keys are displayed in encrypted format . You cannot show these keys in plain text format .
Ubiquiti Networks, Inc.
port
parameter, the command configures the UDP port number to use
Definition
The IP address of the server.
The DNS name of the server.
The port number to use to connect to the specified RADIUS server.
The alias name to identify the server.
auth acct
or keyword is used, the shared secret is configured for the RADIUS
port
number range is 1-65535, with a default of 1812 .
show running-config
Management Commands
port
port
parameter, the
port
value
port
parameter
auth
is
command's display,
83