Snmp-Server Engineid Local; Snmp-Server Filter; Snmp-Server Group - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

snmp-server engineID local

This command configures the SNMP engine ID on the local device .
Default The engineID is configured automatically, based on the device MAC address.
snmp-server engineID local {engineid-string|default}
Format
Mode Global Config
Parameter
engineid-string
default
CAUTION:
Changing the engine ID will invalidate all SNMP configuration that exists on the box .
no snmp-server engineID local
This command removes the specified engine ID .
Default The engineID is configured automatically, based on the device MAC address.
no snmp-server engineID local
Format
Mode Global Config

snmp-server filter

This command creates a filter entry for use in limiting which traps will be sent to a host .
Default No filters are created by default.
snmp-server filter filtername oid-tree {included|excluded}
Format
Mode Global Config
Parameter
filtername
oid-tree
included
excluded
no snmp-server filter
This command removes the specified filter .
Default No filters are created by default.
snmp-server filter filtername [oid-tree]
Format
Mode
Global Config

snmp-server group

This command creates an SNMP access group .
Default Generic groups are created for all versions and privileges using the default views.
snmp-server group group-name {v1 | v2 | v3 {noauth | auth | priv}} [context
Format
context-name] [read read-view] [write write-view] [notify notify-view]
Mode Global Config
Ubiquiti Networks, Inc.
Definition
A hexadecimal string identifying the engine ID, used for localizing configuration. The engine ID must
be an even length in the range of 6 to 32 hexadecimal characters.
Sets the engine ID to the default string, based on the device MAC address.
Definition
The label for the filter being created. The range is 1 to 30 characters.
The OID subtree to include or exclude from the filter. Subtrees may be specified numerically (1.3.6.2.4)
or by keywords (system), and asterisks may be used to specify a subtree family (1.3.*.4).
The tree is included in the filter.
The tree is excluded from the filter.
Management Commands
75