Switching Commands - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference
Chapter 4: Switching Commands
This chapter describes the switching commands available in the EdgeSwitch CLI .
The chapter contains the following sections:
• "Port Configuration Commands" on page 197
• "Spanning Tree Protocol Commands" on page 203
• "VLAN Commands" on page 217
• "Private VLAN Commands" on page 224
• "Voice VLAN Commands" on page 226
• "Provisioning (IEEE 802.1p) Commands" on page 228
• "Protected Ports Commands" on page 229
• "GARP Commands" on page 231
• "GVRP Commands" on page 233
• "GMRP Commands" on page 235
• "Port-Based Network Access Control Commands" on page 237
• "802.1X Supplicant Commands" on page 248
• "Storm-Control Commands" on page 251
• "Port-Channel/LAG (802.3ad) Commands" on page 256
• "Port Mirroring Commands" on page 269
• "Static MAC Filtering Commands" on page 271
• "DHCP Client Commands" on page 274
• "DHCP Snooping Configuration Commands" on page 275
• "IGMP Snooping Configuration Commands" on page 281
• "IGMP Snooping Querier Commands" on page 287
• "Port Security Commands" on page 290
• "LLDP (802.1AB) Commands" on page 294
• "LLDP-MED Commands" on page 300
• "Denial of Service Commands" on page 306
• "MAC Database Commands" on page 313
Note: The commands in this chapter are in one of three functional groups:
• Show commands display switch settings, statistics, and other information .
• Configuration commands configure features and options of the switch . For every configuration
command, there is a show command that displays the configuration setting .
• Clear commands clear some or all of the settings to factory defaults .
Ubiquiti Networks, Inc.

Switching Commands

196