Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual page 250

EdgeSwitch CLI Command Reference
Term
EAP Resp/ID Frames
Received
EAP Response Frames
Received
EAP Req/ID Frames
Transmitted
EAP Req Frames Transmitted
Invalid EAPOL Frames
Received
EAP Length Error Frames
Received
Last EAPOL Frames Version
Last EAPOL Frames Source
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show dot1x statistics 0/1
Port........................................... 0/1
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Transmitted................. 3
EAPOL Logoff Frames Received................... 0
EAP Resp/Id frames transmitted................. 0
EAP Response frames transmitted................ 0
EAP Req/Id frames transmitted.................. 0
EAP Req frames transmitted..................... 0
Invalid EAPOL frames received.................. 0
EAP length error frames received............... 0
Last EAPOL Frame Version....................... 0
Last EAPOL Frame Source........................ 00:00:00:00:02:01
Ubiquiti Networks, Inc.
Definition
Displays the number of EAP Respond ID frames that have been received on the port.
Displays the number of valid EAP Respond frames received on the port.
Displays the number of EAP Requested ID frames transmitted via the port.
Displays the number of EAP Request frames transmitted via the port.
Displays the number of unrecognized EAPOL frames received on this port.
Displays the number of EAPOL frames with an invalid Packet Body Length received on this port.
Displays the protocol version number attached to the most recently received EAPOL frame.
Displays the source MAC Address attached to the most recently received EAPOL frame.
Switching Commands
250