Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual page 330

EdgeSwitch CLI Command Reference
Term
OSPF Routes
Intra Area Routes
Inter Area Routes
External Type-1 Routes
External Type-2 Routes
Reject Routes
Total Routes
Best Routes (High)
Alternate Routes
Route Adds
Route Modifies
Route Deletes
Unresolved Route Adds
Invalid Route Adds
Failed Route Adds
Reserved Locals
Unique Next Hops (High)
Next Hop Groups (High)
ECMP Groups (High)
ECMP Groups
ECMP Routes
Truncated ECMP Routes
ECMP Retries
Routes with n Next Hops
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show ip route summary
Connected Routes............................... 7
Static Routes.................................. 1
RIP Routes..................................... 20
BGP Routes..................................... 10
External..................................... 0
Internal..................................... 10
Local........................................ 0
Ubiquiti Networks, Inc.
Definition
Total number of routes installed by OSPF protocol.
Total number of Intra Area routes installed by OSPF protocol.
Total number of Inter Area routes installed by OSPF protocol.
Total number of External Type-1 routes installed by OSPF protocol.
Total number of External Type-2 routes installed by OSPF protocol.
Total number of reject routes installed by all protocols.
Total number of routes in the routing table.
The number of best routes currently in the routing table. This number only counts the best route to
each destination. The value in parentheses indicates the highest count of unique best routes since
counters were last cleared.
The number of alternate routes currently in the routing table. An alternate route is a route that was not
selected as the best route to its destination.
The number of routes that have been added to the routing table.
The number of routes that have been changed after they were initially added to the routing table.
The number of routes that have been deleted from the routing table.
The number of route adds that failed because none of the route's next hops were on a local subnet.
Note that static routes can fail to be added to the routing table at startup because the routing
interfaces are not yet up. This counter gets incremented in this case. The static routes are added to the
routing table when the routing interfaces come up.
The number of routes that failed to be added to the routing table because the route was invalid. A log
message is written for each of these failures.
The number of routes that failed to be added to the routing table because of a resource limitation in
the routing table.
The number of routing table entries reserved for a local subnet on a routing interface that is down.
Space for local routes is always reserved so that local routes can be installed when a routing interface
bounces.
The number of distinct next hops used among all routes currently in the routing table. These include
local interfaces for local routes and neighbors for indirect routes. The value in parentheses indicates
the highest count of unique next hops since counters were last cleared.
The current number of next hop groups in use by one or more routes. Each next hop group includes
one or more next hops. The value in parentheses indicates the highest count of next hop groups since
counters were last cleared.
The number of next hop groups with multiple next hops. The value in parentheses indicates the
highest count of next hop groups since counters were last cleared.
The number of next hop groups with multiple next hops.
The number of routes with multiple next hops currently in the routing table.
The number of ECMP routes that are currently installed in the forwarding table with just one next hop.
The forwarding table may limit the number of ECMP routes or the number of ECMP groups. When
an ECMP route cannot be installed because such a limit is reached, the route is installed with a single
next hop.
The number of ECMP routes that have been installed in the forwarding table after initially being
installed with a single next hop.
The current number of routes with each number of next hops.
Routing Commands
330