EdgeSwitch CLI Command Reference
exception dump tftp-server
Use this command to configure the IP address of a remote TFTP server in order to dump core files to an external server .
Default
None
exception dump tftp-server {ip-address}
Format
Mode
Global Config
no exception dump tftp-server
Use this command to reset the exception dump remote server configuration to its factory default value .
Default
None
no exception dump tftp-server
Format
Mode
Global Config
exception dump nfs
Use this command to configure an NFS mount point in order to dump core file to the NFS file system .
Default
None
exception dump nfs ip-address/dir
Format
Mode
Global Config
no exception dump nfs
Use this command to reset the exception dump NFS mount point configuration to its factory default value .
Default
None
no exception dump nfs
Format
Mode
Global Config
exception dump filepath
Use this command to configure a file-path to dump core file to a TFTP server, NFS mount or USB device subdirectory .
Default
None
exception dump
Format
Mode
Global Config
no exception dump filepath
Use this command to reset the exception dump filepath configuration to its factory default value .
Default
None
exception dump
Format
Mode
Global Config
exception core-file
Use this command to configure a prefix for a core-file name . The core file name is generated with the prefix as follows:
hostname
• If
is selected:
hostname
• If
is not selected:
hostname
is configured the core file name takes the hostname, otherwise the core-file names uses the
If
MAC address when generating a core dump file . The prefix length is 15 characters .
Default
Core
exception core-file {file-name-prefix | [hostname] | [time-stamp]}
Format
Mode
Global Config
Ubiquiti Networks, Inc.
filepath dir
filepath
file-name-prefix_hostname_Time_Stamp.bin
file-name-prefix_MAC_Address_Time_Stamp.bin
Utility Commands
175