Match Ethertype; Match Any; Match Class-Map - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

match ethertype

This command adds to the specified class definition a match condition based on the value of the ethertype . The
ethertype value is specified as one of the following keywords: appletalk, arp, ibmsna, ipv4, ipv6,
ipx, mplsmcast, mplsucast, netbios,
the range of 0x0600-0xFFFF . Use the
match [not] ethertype {keyword | custom 0x0600-0xFFFF}
Format
Mode Class-Map Config

match any

This command adds to the specified class definition a match condition whereby all packets are considered to
belong to the class . Use the
Default none
match [not] any
Format
Mode Class-Map Config

match class-map

This command adds to the specified class definition the set of match conditions defined for another class . The
refclassname
is the name of an existing DiffServ class whose match conditions are being referenced by the
specified class definition .
Default none
match class-map refclassname
Format
Mode Class-Map Config
Note:
• The parameters
• Only one other class may be referenced by a class .
• Any attempt to delete the
map-name
fails .
• The combined match criteria of
combination based on the class type .
• Any subsequent changes to the
the change attempt fails .
• The total number of class rules formed by the complete reference class chain (including both
predecessor and successor classes) must not exceed a platform-specific maximum . In some cases, each
removal of a refclass rule reduces the maximum number of available rules in the class definition by one .
no match class-map
This command removes from the specified class definition the set of match conditions defined for another class .
refclassname
The is the name of an existing DiffServ class whose match conditions are being referenced by
the specified class definition .
no match class-map refclassname
Format
Mode Class-Map Config
Ubiquiti Networks, Inc.
novell,
not
option to negate the match condition .
not
option to negate the match condition .
refclassname class-map-name
and
refclassname
class-map-name
refclassname
pppoe, rarp; or as a custom EtherType value in
can not be the same .
class while the class is still referenced by any
refclassname
and
class match criteria must maintain this validity, or
Quality of Service Commands
class-
must be an allowed
374