Password; Password (Line Configuration) - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference
no login authentication
Use this command to return to the default specified by the authentication login command .

password

This command allows the currently logged in user to change his or her password without having read/write
privileges .
password
Format
Mode User EXEC
Example: The following is an example of the command .
(UBNT EdgeSwitch) #password
Enter old password:********
Enter new password:********
Confirm new password:********

password (Line Configuration)

Use the password command in Line Configuration mode to specify a password on a line . The default
configuration is no password is specified .
password [password [encrypted]]
Format
Mode Line Config
Parameter
password
encrypted
Example: The following example specifies a password
(UBNT EdgeSwitch)(config-line)# password mcmxxyyy
Example: The following is another example of the command .
(UBNT EdgeSwitch)(Config-line)# password testtest
(UBNT EdgeSwitch) (Config-line)# password e8d63677741431114f9e39a853a15e8fd35ad059e2 e1b49816c24
3d7e08152b052eafbf23b528d348cdba1b1b7ab91be842278e5e970dbfc62d16dcd13c0b864 encrypted
(UBNT EdgeSwitch) (Config-line)# password
Enter new password:********
Confirm new password:********
no password (Line Configuration)
Use this command to remove the password on a line .
no password
Format
Mode Line Config
Ubiquiti Networks, Inc.
Definition
Password for this level. Range: 8-64 characters
Encrypted password to be entered, copied from another switch configuration. The encrypted password
should be 128 characters long because the assumption is that this password is already encrypted with AES.
mcmxxyyy
on a line .
Management Commands
60