Capture Remote Port; Capture File Size; Capture Line Wrap; Show Capture Packets - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

capture remote port

Use this command to configure file capture options . The command is persistent across a reboot cycle .
capture remote port id
Format
Mode Global Config

capture file size

Use this command to configure file capture options . The command is persistent across a reboot cycle .
capture file size max-file-size
Format
Mode Global Config

capture line wrap

This command enables wrapping of captured packets in line mode when the captured packets reach full capacity .
capture line wrap
Format
Mode Global Config
no capture line wrap
This command disables wrapping of captured packets and configures capture packet to stop when the captured
packet capacity is full .
no capture line wrap
Format
Mode Global Config

show capture packets

Use this command to display packets captured and saved to RAM . It is possible to capture and save into RAM,
packets that are received or transmitted through the CPU . A maximum 128 packets can be saved into RAM per
capturing session . A maximum 128 bytes per packet can be saved into the RAM . If a packet holds more than 128
bytes, only the first 128 bytes are saved; data more than 128 bytes is skipped and cannot be displayed in the CLI .
Capturing packets is stopped automatically when 128 packets are captured and have not yet been displayed
during a capture session . Captured packets are not retained after a reload cycle .
show capture packets
Format
Mode Privileged EXEC

debug aaa accounting

This command is useful to debug accounting configuration and functionality in User Manager .
debug aaa accounting
Format
Mode
Privileged EXEC
no debug aaa accounting
Use this command to turn off debugging of User Manager accounting functionality .
no debug aaa accounting
Format
Mode Privileged EXEC

debug aaa authorization

Use this command to enable the tracing for AAA in User Manager . This is useful to debug authorization configuration
and functionality in the User Manager . Each of the parameters are used to configure authorization debug flags .
debug aaa authorization commands|exec
Format
Mode Privileged EXEC
Ubiquiti Networks, Inc.
Utility Commands
166