Stats Group; Stats Flow-Based - Ubiquiti EDGESWITCH ES-24-250W Command Reference Manual

EdgeSwitch CLI Command Reference

stats group

This command applies the group specified on an interface or interface-range .
stats group group-id|name
Format
Mode Interface Config
Parameter
group-id
name
Example: The following shows examples of the command .
(UBNT EdgeSwitch) (Interface 0/1-0/10)# stats group 1
(UBNT EdgeSwitch) (Interface 0/1-0/10)# stats group 2
no stats group
This command deletes the interface or interface-range from the group specified .
no stats group group-id|name
Format
Mode Interface Config
Example: The following shows examples of the command .
(UBNT EdgeSwitch) (Interface 0/1-0/10)# no stats group 1
(UBNT EdgeSwitch) (Interface 0/1-0/10)# no stats group 2

stats flow-based

This command applies the flow-based rule specified by the ID on an interface or interface-range .
stats flow-based rule-id
Format
Mode Interface Config
Parameter
rule-id
Example: The following shows examples of the command .
(UBNT EdgeSwitch) (Interface 0/1-0/10)# stats flow-based 1
(UBNT EdgeSwitch) (Interface 0/1-0/10)# stats flow-based 2
no stats flow-based
This command deletes the interface or interface-range from the flow-based rule specified .
no stats flow-based rule-id
Format
Mode
Interface Config
Example: The following shows examples of the command .
(UBNT EdgeSwitch) (Interface 0/1-0/10)# no stats flow-based 1
(UBNT EdgeSwitch) (Interface 0/1-0/10)# no stats flow-based 2
Ubiquiti Networks, Inc.
Description
The unique identifier for the group.
The name of the group.
Description
The unique identifier for the flow-based rule.
Utility Commands
193