EdgeSwitch CLI Command Reference
Term
Console Logging Severity
Filter
Buffered Logging
Persistent Logging
Persistent Logging Severity
Filter
Syslog Logging
Log Messages Received
Log Messages Dropped
Log Messages Relayed
Example: The following shows example CLI display output for the command .
(UBNT EdgeSwitch) #show logging
Logging Client Local Port
Logging Client Source Interface
CLI Command Logging
Console Logging
Console Logging Severity Filter
Buffered Logging
Persistent Logging
Persistent Logging Severity Filter
Syslog Logging
Log Messages Received
Log Messages Dropped
Log Messages Relayed
show logging buffered
This command displays buffered logging (system startup and system operation logs) .
show logging buffered
Format
Mode
Privileged EXEC
Term
Buffered (In-Memory)
Logging
Buffered Logging Wrapping
Behavior
Buffered Log Count
show logging hosts
This command displays all configured logging hosts . Use the "|" character to display the output filter options .
show logging hosts
Format
Mode
Privileged EXEC
Ubiquiti Networks, Inc.
Description
The minimum severity to log to the console log. Messages with an equal or lower numerical severity
are logged.
Shows whether buffered logging is enabled.
Shows whether persistent logging is enabled.
The minimum severity at which the logging entries are retained after a system reboot.
Shows whether syslog logging is enabled.
Number of messages received by the log process. This includes messages that are dropped or ignored.
Number of messages that could not be processed due to error or lack of resources.
Number of messages sent to the collector/relay.
: 514
: (not configured)
: disabled
: enabled
: error
: enabled
: disabled
: alert
: disabled
: 1010
: 0
: 0
Description
Shows whether the In-Memory log is enabled or disabled.
The behavior of the In-Memory log when faced with a log full situation.
The count of valid entries in the buffered log.
Utility Commands
129