Creating A Loadable Prerecorded Tones File - AudioCodes Mediant 1000 User Manual

SIP User's Manual
To decode an encoded ini file, take these 4 steps:
1. Click the Select File... button under the 'Decode ini File(s)' section.
2. Navigate to the folder that contains the file you want to decode.
3. Click the file and click the Open button. the name and path of both the encode ini file
and the output decoded file appear in the fields under the Select File button. Note that
the name of the output file can be modified.
4. Click the Decode File(s) button; a decoded ini file with the name you specified is
created.
Note:
G.1.4

Creating a Loadable Prerecorded Tones File

For detailed information on the PRT file, refer to Section
To create a loadable PRT dat file from your raw data files, take
these 7 steps:
1. Prepare the prerecorded tones (raw data PCM or L8) files you want to combine into a
single dat file using standard recording utilities.
2. Execute the TrunkPack Downloadable Conversion utility, DConvert.exe (supplied with
the software package); the utility's main screen opens (shown in
3. Click the Process Prerecorded Tones File(s) button; the Prerecorded Tones File(s)
screen, shown in
Version 5.0
The decoding process verifies the input file for validity. Any change made
to the encoded file causes an error and the decoding process is aborted.
Figure G-5, opens.
G. Accessory Programs and Tools
17.2
433
on page 395.
Figure G-1).
December 2006