Protocol Management; Protocol Definition Parameters; General Parameters - AudioCodes Mediant 1000 User Manual

5.5

Protocol Management

The Protocol Management menu is used to configure the gateway's SIP parameters and
tables.
Note:
5.5.1

Protocol Definition Parameters

Use this submenu to configure the following gateway's specific SIP protocol parameters:
General Parameters (refer to Section
Proxy & Registration (refer to Section
Coders (refer to Section
DTMF & Dialing (refer to Section
5.5.1.1

General Parameters

The General Parameters option is used to configure general SIP parameters.
To configure the general parameters under Protocol Definition,
take these 4 steps:
1. Open the 'General Parameters' screen (Protocol Management menu > Protocol
Definition submenu > General Parameters option); the 'General Parameters' screen
is displayed.
SIP User's Manual
Throughout this chapter, parameters contained within square brackets are
the names used to configure the parameters via the ini file.
5.5.1.3 on page 78)
5.5.1.4
5.5.1.1 on page 62)
5.5.1.2 on page 70)
on page 80)
62
Mediant 1000
Document #: LTRT-83301