Linux™ Debian Installation Instructions; Stage 1: Obtaining The Iso Image - AudioCodes Mediant 1000 User Manual

L.6 Linux™ Debian Installation Instructions
Perform the following five stages for the Linux™ Debian Installation. (Some Debian
distributions may vary slightly).
L.6.1

Stage 1: Obtaining the ISO Image

To obtain an updated ISO image, create it using the steps detailed in the section below.
To create an ISO image using an ISO editor utility, take these 5
steps:
1. Insert the 1st installation disk of the Linux™ Debian distribution into the CD-ROM drive
of the Windows™ PC.
2. Using Internet Explorer, download a utility that allows editing of an ISO image. The
WinISO™ program (http://www.winiso.com/download.htm) may be used.
3. Start WinISO™, and then from the Actions menu, choose Make ISO from CDROM.
4. Create a Partner Install folder on your hard drive. Select boot.iso as the output
filename, and then click Make.
SIP User's Manual
Figure L-13: WinISO - Actions Screen
Figure L-14: Create ISO from CD-ROM
482
Mediant 1000
Document #: LTRT-83301