Snmp V3 Usm Users; Configuring Snmp V3 Users Via The Ini File; Table 16-3: Snmp V3 Security Levels; Table 16-4: Snmp V3 Predefined Groups - AudioCodes Mediant 1000 User Manual

16.7.2 SNMP v3 USM Users

You can define up to 10 User-based Security Model (USM) users (USM users are referred
to as "v3 users"). Each v3 user can be associated with an authentication type (none, MD5,
or SHA-1) and a privacy type (none, DES, 3DES, or AES).
Security Level
noAuthNoPriv(1)
authNoPriv(2)
authPriv(3)
Each SNMP v3 user must be associated with one of the predefined groups listed in the
following table:
Group
ReadGroup1
ReadWriteGroup1
TrapGroup1
ReadGroup2
ReadWriteGroup2
TrapGroup2
ReadGroup3
ReadWriteGroup3
TrapGroup3

16.7.2.1 Configuring SNMP v3 users via the ini File

Use the SNMPUsers ini table to add, modify, and delete SNMPv3 users. For a description
of the SNMPUsers table ini file parameters, refer to Section
Note:
You can enter keys in the form of a text password or in the form of a localized key in hex
format. If using a text password, then it should be at least eight characters in length. Below
is an example of a localized key format:
26:60:d8:7d:0d:4a:d6:8c:02:73:dd:22:96:a2:69:df
SIP User's Manual

Table 16-3: SNMP v3 Security Levels

Authentication
None
MD5 or SHA-1
MD5 or SHA-1

Table 16-4: SNMP v3 Predefined Groups

Get Access Set Access
Yes No
Yes Yes
No No
Yes No
Yes Yes
No No
Yes No
Yes Yes
No No
The SNMPUsers ini table is a hidden parameter. Therefore, when you
perform a "Get ini File" operation using the Web interface, the table will not
be included in the generated file.
None
None
DES, 3DES, AES128, AES192, or
AES256
Send Traps
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
6.5.6
380
Mediant 1000
Privacy
Security Level
noAuthNoPriv(1)
noAuthNoPriv(1)
noAuthNoPriv(1)
authNoPriv(2)
authNoPriv(2)
authNoPriv(2)
authPriv(3)
authPriv(3)
authPriv(3)
on page 229.
Document #: LTRT-83301