Figure 5-52: Firewall Settings Screen - AudioCodes Mediant 1000 User Manual

SIP User's Manual
To create a new access rule, take these 6 steps:
1. Open the 'Firewall Settings' screen (Advanced Configuration menu > Security
Settings > Firewall Settings option); the 'Firewall Settings' screen is displayed.
2. In the 'New Rule Index' field, enter the index of the access rule that you want to add.
3. Click the Add an Empty Rule button; a new rule appears; alternatively, click the Copy
Selected Rule as a New Rule button; a new rule that is an exact copy of the currently
selected rule appears.
4. Configure the rule's parameters according to
5. Click one of the following buttons:
•
Apply Rule Settings to save the new rule (the rule isn't active).
•
Activate Rule to save the new rule and activate it.
•
Delete Rule to delete the rule.
6. To save the changes so they are available after a power fail, refer to Section
page 200.
To edit a rule, take these 5 steps:
1. Select the radio button of the entry you want to edit.
2. Click the Make Rule Editable button; the rule's fields can now be modified.
3. Modify the fields according to your requirements.
4. Click the Apply Rule Settings button to save the changes.
5. To save the changes so they are available after a power fail, refer to Section
page 200.
To activate a de-activated rule, take these 2 steps:
1. Select the radio button of the entry you want to activate.
2. Click the Activate Rule button; the rule is active.
To de-activate an activated rule, take these 2 steps:
1. Select the radio button of the entry you want to activate.
2. Click the DeActivate Rule button; the rule is de-activated.
To delete a rule, take these 3 steps:
1. Select the radio button of the entry you want to activate.
2. Click the Delete Rule button; the rule is deleted.
3. To save the changes so they are available after a power fail, refer to Section
page 200.
Version 5.0

Figure 5-52: Firewall Settings Screen

173
5. Web Management
Table 5-35.
5.9.2 on
5.9.2 on
5.9.2 on
December 2006